THE DEULEC WAY

You make
the part.
We prepare
the plate.

From raw steel to finished plates, ready for machining. Material, shaping and surface grinding—coordinated around your requirements.

Configure my plates Follow the journey

Illustrative prepared steel plate with a smooth ground top, milled sides and lightly deburred chamfers — ONE PLATE. A BETTER START. Drag to compare

ONE PLATE. A BETTER START. Drag to compare

RAW → SHAPED → GROUND → PACKEDA clearer route to your next operation.

LESS COORDINATION. MORE TIME AT YOUR MACHINE.See how it works

Bulk material sourcingBuying strength behind your requirement.

An established vendor networkThe workshops. The coordination. Handled.

One point of contactFrom your enquiry to your prepared plates.

01 / FROM STOCK TO SPECIFICATION

There’s a lot of work
before your work.

Follow a plate through the stages we coordinate. You share the requirement. We bring the preparation together.

THE PLATE JOURNEY01 / 06

Illustration of a raw rectangular steel block with mill scale and sawn sides on a workshop bench

RAW MATERIALThe starting point for your requirement

Illustrative process photographyKeep scrolling

01 / Source

A better start, at the source.

Buying a few plates should not mean doing all the sourcing yourself. Our bulk purchasing helps us source material competitively, around the grade and sizes your job needs.

Your advantage: access to our material sourcing.

Material grade and supply condition agreed first.

Illustration of a rectangular steel plate held in a duplex milling machine for shaping

02 / Shape

The right workshop. Already connected.

We coordinate shaping through our established vendor network. The preparation sizes and work required travel with the job, so you can spend less time finding workshops and following up.

Your advantage: fewer vendors to find and manage.

Machining allowance and preparation stages agreed to suit the job.

Illustration of a guarded surface-grinding wheel working on the top face of a steel plate

03 / Grind

The finish your next operation needs.

When you select shaped and surface-ground plates, we arrange the agreed grinding work. Tell us which faces, final dimensions and tolerances matter before the job begins.

Your advantage: preparation planned around your machining.

Final dimensions and surface requirements belong in the specification.

Illustration of a gloved operator checking a finished steel plate's thickness with a caliper

04 / Check

Clear sizes. A shared specification.

The prepared plate is checked against the agreed dimensional requirements. Drawing references, critical tolerances and any additional inspection or documentation needs are discussed with your order.

Your advantage: a requirement everyone can work to.

Share critical dimensions and documentation needs with your enquiry.

Illustrative finished steel plate enclosed in clear bubble wrap with an example Deulec identification sticker

05 / Protect

Care for the finish, beyond the workshop.

The prepared block is protected for handling. Bubble wrapping keeps a layer between the finished surfaces and their surroundings, with packing arranged to suit the order and delivery.

Your advantage: attention to how your plates arrive.

Protective wrapping and dispatch packing are matched to the job.

Example labelled steel plate package identifying the material, final dimensions, quantity and preparation

06 / Identify

Open the pack. Know the part.

The part name, material, final size and quantity are brought together on the package label. Your order reference connects the prepared plate with the work waiting in your workshop.

Your advantage: less guesswork when the order arrives.

See the example identification label below.

Clearly specified. Carefully prepared. Ready for your next operation.

02 / THE DIFFERENCE IS IN THE WHOLE JOB

Compare the plate.
And everything it takes.

A material rate is only the starting point. Preparation, movement and your time all belong in the buying decision.

Arranging steel plate preparation yourself compared with ordering through Deulec
THE COMPLETE JOBSame requirement. Two ways to get there.	THE DIY ROUTEArranging it yourselfYou connect every step.	PREPARED THROUGHOne enquiry. One coordinated job.
01Material sourcing	A small purchase. Your search. Find the grade and stock size at the available small-quantity rate.	Our buying strength. Your requirement. Bulk sourcing helps us buy competitively for the material your job needs.
02Preparation vendors	Find. Explain. Negotiate. Arrange shaping and grinding with separate workshops and charges.	The right connections, already in place. An established vendor network, with the agreed preparation coordinated for you.
03Movement & follow-ups	Every stage needs your attention. Arrange movements and check progress with each workshop.	One point of contact. Speak to our team about preparation progress and delivery arrangements.
04Sizes & identification	Keep every supplier on the same page. Pass dimensions between workshops and identify parts for your job.	Clear specifications. Identified parts. Agreed dimensions, preparation checks and a label that connects the plate to your order.
05Your working time	More time arranging the work. Use workshop hours on sourcing, coordination and preparation questions.	More time doing your work. Focus your attention on machining and the work your own clients need.

Your sizes. Your material. Your next job.Let’s prepare your plates

THE COMPLETE PICTURE

Think beyond the price per kg.

Compare the same grade, final sizes and supply scope. Actual savings depend on the requirement.

Material+Preparation+Transport+Your time

Bring your next requirement. Compare the complete quotation.

Request a quotation

Example finished steel plate protected by bubble wrap, with a Deulec label attached outside the wrapping — PROTECTED ON THE OUTSIDE.
**Identified down to the detail.**

03 / A BETTER HANDOVER

The right plate.
Clearly labelled.

A finished surface deserves thoughtful packing. A busy workshop deserves to know what is inside.

PART IDENTIFICATION

Plate 01READY FOR MACHINING

Material: MS · Mild steel
Final size (mm): 300 × 220 × 40
Quantity: 1 piece
Preparation: Shaped + surface ground
Order reference: DEMO-001

DEULEC INDUSTRIESEXAMPLE LABEL

Illustrative label and process images. Final packing, labelling and supply scope are agreed with your order.

BEFORE YOUR FIRST ORDER

A few useful
details.

Talk to our team

What should I send for a quotation?

Share the material grade, final dimensions, quantity and required preparation for each part. Include your drawing revision, critical tolerances and any documentation needs. We discuss the specification, availability, pricing and delivery before you confirm.

Can I order cut-to-size material as well?

Yes. Choose cut-to-size material for your own preparation, or shaped and surface-ground plates for the agreed finished sizes. Your quotation confirms the preparation and supply scope.

How do I compare your quotation with buying raw steel?

Compare the same material grade, final dimensions, quantity and preparation scope. Include the material you need for preparation, shaping, grinding, transport and your coordination time. Check GST and delivery separately wherever they are not included. Savings vary with the job.

Are special tolerances and inspection included?

Tell us your critical tolerances and inspection or certification needs when requesting the quotation. The required checks, documents and any additional work must be agreed for your order.

YOUR NEXT PLATE STARTS HERE

More time making.
Less time arranging.

Share your sizes, material and preparation. Let’s get your next job off to a better start.

Configure my plates Request a quotation

ALL YOU NEED TO GET STARTED

01 Your material grade
02 Final sizes & quantities
03 Preparation & drawing requirements

Plan your material weight

You make the part.We prepare the plate.